- Place washer and bracket on bolt provided and install on frame cross bar.
- Rotate lower clamps to position screw heads toward the outside.
- Place top of cooler in front of bracket and install clamp around cooler and upper bracket bar, with the screw toward the rear and the screw head down.
- Fasten lower clamps around frame rails. See NOTE B below.
NOTE B:
Depending on the diameter of your frame rails, 1 1/4", 1 1/8", or 1", you may want to shorten the ends of the lower clamps so they do
not extend beyond the screw heads. Count the number of slots you want to shorten. Remove and shorten clamps, file or grind ends smooth, reinstall clamps. |
 |